5 Steps to Disable Startup Videos and Splash Screen In Borderlands: The Pre-Sequel

Annoyed by the splash screen and intro videos in Borderlands: The Pre-Sequel? Here are the 5 steps you need to do in order to get past them and immediately jump into the action.

  1. Right click the game in your Steam Library
  2. Click “Properties”
  3. Click the “Set Launch Options” button
  4. Type the following and then click the OK button: -NoLauncher -NoStartupMovies
  5. Press the “Close” button

Done! Beware that you may encounter some minor bugs though if you do this. If you know of a better way to do it, let us know in the comments section below.

Top 10 Fixes for Crusader Kings II Crashes, Errors, Charlemagne DLC, Religion Tab, Blank event, Load save, Patch 2.2, Can't move army, Army crash

Crusader Kings II:  Charlemagne seems to have a plenty of problems and bugs lately, even the official forum is not accessible by users. Before we start with the fixes, I want you to make sure your PC meet the minimum requirements of the game. We can’t fix your PC to run something it’s not capable of. Your PC may also contain viruses, so please check it out too.

Top 10 Fixes for Crusader Kings II Crashes, Errors, Charlemagne DLC, Religion Tab, Blank event, Load save, Patch 2.2, Can’t move army, Army crash

1. Crusader Kings II won’t start

Please go to C: Program Files (86)Steamsteamappscommoncrusader kings iiDX then run dxsetup.exe.

If that doesn’t work for you, download “Microsoft Visual C++ 2010 SP1 Redistributable Package” with this link: http://www.microsoft.com/download/en/details.aspx?id=8328

2. Game crashes after new DLC

Please make sure you don’t have any mods installed. A new DLC may cause older mods to become incompatible with the game.

If you disabled all mods and it still crashes, then try this: Go to “Properties” then “Set Launch Options”, and click “Add Option”. Add in “-threads=1”. This one should fix the crashes.

3. Game crashes at startup or when clicking religion tab

There are several reasons to this. I have listed three ways to fix some of the crashes. Try all of them before looking for more fixes.

  • Try to go to the folder “steamappscommoncrusader kings ii” and run and install “vcredist.exe”. Just a tips, to remove the annoying steam dialogue you see every time you start the game, rename “Installscript.vdf” to “Installscript.vdf.bak”.
  • Try to lower the screen display of the game. Normally, it’s 1920 x 1080. That’s a bit high for people with smaller screens.
  • Install the demo of the game first. Then copy “settings.txt” fromt he demo folder to “documentsparadox interactivecrusader kings” ii. Steam may have messed the documents around on the install process.
  • Your firewall may have not registered Crusader Kings II as a trusted application. If so, please disable your firewall.

4. Crash when gathering units (Linux)

This happens mostly to linux users. Actually you can solve using the same method we solve “Game crashes after new DLC”. Simply go to “Properties”, “Set Launch Options” and “Add Option”, and add in “-threads=1”.

5. Blank Event Windows

Here again, if you have any mods, please disable them. Every time the game gets a new patch, the mods may lose its compatibility with the game.

6. Can’t move armies (Mac)

If you are are using Mac and have just downloaded the Charlemagne DLC, then you can have this problem. Currently this problem isn’t fixed, you just need to change to windowed mode and wait for a new patch to come.

7. Not getting achievements

Make sure you really have completed the requirements to get an achievements. If you have done, and still aren’t getting achievements then your game may be outdated. Update your game and the achievements should work.

8. No DLC

Someone have bought all the DLCs but none of them are available in the game. The Steam still says you have the the packs though. Try to do a “clean” re-install. First, backup all your save files and delete all files associated with the game in the steam folder. Finally, re-install the game on Steam.

9. Can’t load saves

Right click the game in your Steam Library and click “Properties”, and go to “BETAS”, and then choose 2.1.6. Try loading your saved game now.

10. Any problems with the new patch

There seems to be many problems with the new 2.2 patch of Crusader King II. If you are one of the victims, or not happy with the current patch, it’s possible to revert back to 2.1.6. In Steam Library right click the game and click “Properties”, and click “BETAS” then select “2.1.6” in the dropdown list. Note that if you have any DLCs that are released after 2.1.6, then you have to disable them first in the CK2 launcher, or the game will crash.

Once again, Crusader Kings II seems to have some problems recently, and some people can’t access its forum. This is why we have made this list, hoping to help some of the poor players out there. Please remember that is many cases, bugs are caused by incompatibility with your computer. If so, you may not be able to play this game normally until you get a new computer. We know there are still many bugs we haven’t listed. If you encounter other problems, please don’t hesitate to leave a comment down below, and we will try to help you out.

Top 10 Fixes for Legend of Grimrock 2 Crashes, Errors, Won't Start, Lagging, Black Screen, Low FPS, Blurry, Invisible Mouse, D3DError, D3DX9_43 DLL Missing

After having been recently released, the Legend of Grimrock 2 has become the hottest video game of the moment. In spite of this, there are still a couple of shortcomings that can greatly impact your performance and experience, meaning that you will not be able to enjoy the game to the fullest if they show up. Before we proceed to listing 10 fixes for the Legend of Grimrock 2, make sure that your PC meets the minimum system requirements needed for the game to work, and that there is no potential malware, Trojan, or virus that might prevent it from functioning properly.

Top 10 Fixes for Legend of Grimrock 2 Crashes, Errors, Won’t Start, Lagging, Black Screen, Low FPS, Blurry, Invisible Mouse, D3DError, D3DX9_43 DLL Missing

1. Legend of Grimrock 2 won’t run.

Install the Microsoft VC++ 2010 Redistributable Package to the DirectX folder.

  • Go to Microsoft’s website, and download Visual C++ 2010 Redistributable Package.
  • Go to the DirectX folder that is located in (C:/Program Files/Steam/steamapps/common/Legend of Grimrock/DirectX).
  • Install the VC++ 2010 Redistributable Package to that folder.
  • Run Legend of Grimrock 2.

2. Legend of Grimrock 2 crashes upon startup.

If the game crashes upon startup, you will have to reset the settings of the game. Go to Documents > Almost Human > Legend of Grimrock 2, and look for a file named “grimrock.cfg.” Once you locate it, delete it. This will reset the settings, which will fix the appcrash issue.

3. Legend of Grimrock 2 runs slowly.

  • Check out if the v-sync setting if turned on. If yes, turn it off, as it can make the game run sluggishly.
  • If the v-sync is already turned off, you might need to force it on.
  • If adjusting the v-sync setting isn’t enough, lower the game resolution.
  • Update your graphics card drivers.

4. Screen appears black.

If the screen appears black but the torches are visible, you can correct that by resetting graphics drivers to default values from the control panel. Alternatively, you can disable anti-aliasing, which seems to be the most frequent cause of black screen with AMD cards.

5. Graphics are blurry.

If small text or graphics appear a bit blurry, then there might be a problem with Mipmap Detail Level in the AMD VISION Engine Control Center.

  • Set the Mipmap Detail Level to “Quality.”
  • Disable Catalyst AI.
  • Set everything else to App Controlled/off.

6. Mouse cursor isn’t visible.

Disabling mouse pointer trails should fix this issue, and make the mouse cursor visible again.

7. D3DError. D3DError – D3DXCompileShader failed: ERROR_BAD_EXE_FORMAT.

To solve this error, you will have to modify a new DirectX installer.

  • Download the latest version of DirectX from Microsoft’s website.
  • Extract the “DXSetup.exe” file to a folder.
  • Enter the following subfolders: “32 bit folder – WindowsSysWOW64” and “64 bit folder – WindowsSystem32.”
  • Delete “D3DCompiler_43.dll,” D3DX9_43.dll,” and “d3dx11_43.dll” files.
  • Rerun the “DXSetup.exe” file from the original downloaded archive.

8. Steam says that Legend of Grimrock 2 isn’t out yet.

Close and restart Steam, then check your regional settings.

9. Legend of Grimrock 2 has no reaction to clicks.

If the game has no reaction to clicks, you’ll want to make a couple of modifications to the “grimrock.cfg” file.

  • Go to (local/share/Almost Human/Legend of Grimrock/grimrock.cfg).
  • Change displayMode to 2 or 3.
  • Set game resolution based on your PC’s monitor resolution.
  • Save the file, and rerun Legend of Grimrock 2.

10. System error: d3dx9_43.dll missing.

If the DirectX version you are using isn’t updated, there’s a good chance that you’ll be encountering this system error. To fix it, uninstall the DirectX version you have, and restart your PC. Download and install the latest version of DirectX provided on Microsoft’s website, restart your machine again, and rerun Legend of Grimrock 2 – the error should be fixed now. You can also use this tool to update your DirectX drivers automatically.

Top 10 Fixes for Final Fantasy XIII PC Crashes, Errors, Stuck at 720p, Lag, Stutter, Poor FPS, Black screen, Controllers, Audio, Esc key

The thirteenth installment to the much acclaimed Final Fantasy saga did not deliver as was expected by its loyal fans. Nevertheless, it was a fine game play that lives up to its predecessors. Frankly, I personally love the game for its graphical detail, but realistic hair strands might not cut it for all of us. As with every other game, issues are bound to pop up and interrupt your exciting afternoon of play. Here are 10 most common Final Fantasy XIII PC crash issues and their fixes to help straighten things back out for you.

Top 10 Fixes for Final Fantasy XIII PC Crashes, Errors, Stuck at 720p, Lag, Stutter, Poor FPS, Black screen, Controllers, Audio, Esc key

1. Game locked at 720p resolution

While this is not an issue per se, the fact that Final Fantasy XIII PC version came locked to a 1280*720 screen resolution has raised a number of disgruntled voices. To fix this simply download Durante’s plug-in, GeDoSaTo, and it will give you screen resolution capabilities of up to 3840*2160p.

2. Game stuttering/lagging during play

This is especially felt during cut scenes or when moving the camera around. To fix this, go to your start menu and then right click on “Computer”. Choose “manage” and navigate to the “Device Manager” page. Click on “Human Interface Devices” and disable all “HID Compliant Devices”. This should fix the problem for most of you.

3. FPS drop fix for Nvidia

To fix this simply navigate to your Nvidia control panel and then into the “Manage 3D Settings / Global Settings”. Find the power management option and set it to prefer maximum performance. You can also set the default windows power management option to maximum.

4. Final Fantasy XIII PC crash instantly after start

Try disabling data encryption protection for starters. If this does not work, you can try running the game as Admin.

5. Game running at a constant 30 FPS

Turning the Vsync option on Nvidia graphics control panel to off will probably help get rid of this problem.

6. Poor FPS on AMD

Try hitting the Alt-Tab keys and see if the issue goes away for you.

7. Black screens during cut scenes

Try changing your screen resolution to 1280*720p. You should also make sure your video codecs are installed and up to date.

8. Game pad/controllers issues fix

This fix might be a bit tricky but here goes… First navigate to c:Program FilesSteamAppscommonFinal Fantasy XIIIWhite_dataprogwinbin. Create a new file, joypad.txt and paste the following into it.

  • Pad.Back = Button.9
  • Pad.LeftStick.Click = Button.11
  • Pad.LeftStick.X = X-Axis
  • Pad.LeftStick.Y = Y-Axis.Inverted
  • Pad.RightDPad.Down = Button.3
  • Pad.RightDPad.Left = Button.4
  • Pad.RightDPad.Right = Button.2
  • Pad.RightDPad.Up = Button.1
  • Pad.RightStick.Click = Button.16
  • Pad.RightStick.X = off
  • Pad.RightStick.Y = off
  • Pad.Start = Button.10
  • Pad.Trigger.LeftBottom = Button.5
  • Pad.Trigger.LeftTop = Button.7
  • Pad.Trigger.RightBottom = Button.6
  • Pad.Trigger.RightTop = Button.8

Rename the file to joypad.exe from joypad.txt.

9. Audio not working

Try updating your drivers and see if this helps before doing a reinstall.

10. ESC key closing game

To fix this Final Fantasy XIII PC crash issue all you have to do is set the game to play with borderless windows. This should ensure a confirmation message pops up allowing you to deny the game’s closure.

If you have any Final Fantasy XIII PC crash related issues that you have encountered and we have failed to cover, please let us know by posting your experiences in the comment section below. Happy gaming.

Top 10 Fixes for The Evil Within Crashes, Errors, Won't Start, Change Resolution, Skip Intro Video, Unlock 30 FPS, Black bars, Console Commands, Launch Options

Ah, The Evil Within, the latest release from Bethesda, the horror laying down the hype. But don’t you hate it when you get those glitches and problems that you don’t know how to fix and your so intrigued in the game you don’t want to wait to play it? To guarantee you have the highest chance of no problems or system failures make sure you have 41 GB HDD space available for game instalment and 4GB RAM free for games progress to run smoothly. Windows 7 or 8.1 is advised for this Game to work to its full Capability.

Top 10 Fixes for The Evil Within Crashes, Errors, Won’t Start, Change Resolution, Skip Intro Video, Unlock 30 FPS, Black bars, Console Commands, Launch Options

1. The Evil Within downloaded but won’t play

you have downloaded the game and nothings happening, this could be due to a setting on your computer that avoids the game receiving data. To fix this problem you need to go to your control panel, select your system and security folder, select system, advance system settings, advance, performance and then your data execution prevention folder you will need to add your games exe. folder here to ensure your game is receiving the data needed. once followed this step your game should work just fine.

2. The Evil Within crashes when launching

If your game still doesn’t work after following the solution above, you may have an out of date version of DirectX. You need to update to version 11.

3. How to change resolution and performance via console

To enable your ability to change the setting you need to change to fix the problems with this game go to your ‘the evil within steam’ option, select properties, set launch and enter the code ‘+com_allowconsole1’. once you have entered this all the codes to fix the resolution, performance and ability settings will all be accessible by opening the in game console and entering the codes needed, which are provided in the corresponding fixes below. Read on!

4. The Evil Within runs slow, stuck at 30 FPS

Your game running slow or acting as if someone is pressing a play pause button every half second? That could be due to the fact this game is custom to 30 frames per second and may not work properly on other settings that require more or less frames.

To limit your game play to the 30 frames per second:

  1. On Steam, right-click on The Evil Within
  2. Go to properties, set launch and enter ‘R_swapinterval-2’

This limits your frames per second to 30, this setting is a default for the game’s performance.

Enter ‘R_swapinterval-1’ to limit them to 60 but as the game play standard being set on 30 FPS the game still may not play the best.

5. How to change resolution and remove black bars in The Evil Within

A common problem with this game is black bars, that is due to the aspect ratio of the game. this game was designed with being 2:35:1 the game may not download with the right resolution for ultimate game play. to set the game to the right resolution you need the code ‘R_foraspectratio’

Once you have installed the game it will be set on the default aspect ratio of 2:5. 2:35:1 the best resolution setting for this games performance.

Before you can enter that you need to work out what resolution you want.

For full resolution enter ‘R_foraspectratio0’ but with the game still having upgrades and repairs as no games perfect as soon as its released. Full resolution is not ideal and may cause glitches and freezing or only a selected view of the game screen.

‘R_foraspectratio1.8’ or ‘R_foraspectratio2’ sets your game aspect ratio to the 2:35:1 ratio setting that the game plays best on and also removes the black bars that are displayed through game play.

Once you install the game it will be set on default 2:5 so this is an advised straight up edit.

6. How to get unlimited ammunition

Everyone hates getting so far in a game then getting stuck at the same stage repeating the same quest and running out of ammo, dying and having to start that stage again. For endless ammunition:

  1. On Steam, right-click The Evil Within
  2. Go to properties > launch settings
  3. Enter ‘G_infiniteammo’ to supply yourself with a gun that will just keep shooting

7. How to stop the timer

Alright now you’ve got the ammunition but just not enough time on the clock. don’t you wish you could just stop the clock? Follow the steps above, but this time input ‘G_stoptime1-‘. This will freeze your timer.

8. Using the debug camera

Never know what is around that next corner, then your attacked with never ending things to defend yourself from? Then you’re looking for the next trick. This allows you to explore with the camera but your character Detective Sebastian Castellanos stays where you left him.

In the launch options as described in above steps, this time enter ‘toggledebugcamera’.

9. God mode

Getting stuck in a corner with too many attackers to escape or getting stuck in a room with no way out? enabling ghost ability of passing through walls is quite helpful in these cases. Enter ‘god’ and you can fly through as many rooms as you like without needing to open any doors or break any windows. this game play edit also helps deter enemies and seem invisible to them that you can walk right by them and they don’t see anything.

10. How to Skip Intro Videos

Just edging to play the game but getting stuck watching the introductions and tutorials? enter ‘+com_skipintrovideo1’ and this will ensure you get to your game play as soon as possible with no waiting for your game to show you how to play.

Hopefully these tips and solutions solve all your problems and you enjoy playing the game to its full capability.

Top 10 Fixes for Star Citizen Crashes, Errors, Unable to Start, Lag, Stuck Loading, Access invalid, D3Dx9_43 DLL, Download Manifest

Started three years ago in 2011, the Star Citizen PC game is well on its way to becoming a franchise. It has attracted the highest amount in recorded crowd funding history – a jaw dropping 50 million to date. Despite delivering amazing game play with fascinating scenarios, its main strength lies in its realism in portraying a virtual universe that is slave to all our physical laws. That said, here is a list of common Star Citizen crash problems and their quick fixes to ensure uninterrupted game play pleasure.

Top 10 Fixes for Star Citizen Crashes, Errors, Unable to Start, Lag, Stuck Loading, Access invalid, D3Dx9_43 DLL, Download Manifest

1. Star Citizen lagging during play

A game lag is such a dreadful experience. However there is a simple fix to this. First, make sure you have updated all your PC drivers especially the graphics. If you still experience a lag you might have to upgrade your graphic card. You can read through the game’s website for recommended hardware specs for guidance.

2. Star Citizen won’t start

Try deleting the user folder. Should do the trick.

3. Game graphics problem after patch install

After downloading and installing a patch you my notice a sort of downgrade in your game visual performance. This can be in the form of fuzziness or pixilated color patches. You should wait for a couple minutes the game graphics will return to normal.

4. Application unable to start correctly (0xc000007b)

You might want to run the game’s dependency walker from the SC.exe just in case there is one or a couple of them you are missing that might be causing the problem. However a quick reinstall of the game’s dependency files should help fix the game right back up. These include all directx, .net framework and c++ redistributables and reinstalling them or letting your PC automatically do it for you.

5. Unable to determine current version

This frustrating error can be fixed by ensuring that you have updated all your drivers and game patches. If this fails a simple reinstall should suffice.

6. Star Citizen stuck on loading on windows 7

This Star Citizen crash issue is due to an interaction problem between the Windows 7 system networking and the game’s CryEngine. To fix this you will have to navigate to the services panel on your task manager. Once there locate the ‘Base filtering Engine’ service. Once you find it just hit restart and after, load the game.

7. Access invalid error

This error usually occurs after patch installs. It can be fixed quickly by just deleting the user folder.

8. Launcher won’t start: error d3dx9_43.dll missing

We would advise against manually downloading and installing the required file to repair this Star Citizen crash. Instead do a complete reinstall of your DirectX software for a safer and more stable fix.

9. No users logged in

Run the launcher and log in but do not launch it. Locate the game installation folder and navigate into the CitizenClientBin64 child folder. Right click on the StarCitizen.exe file and run it as an administrator.

10. Unable to download manifest

Simply run the game as an administrator and you should be able to download the manifest.

With about a quarter million players, Star Citizen has definitely got something right. The game is still in development and crashes are bound to be prominent. You can take part in the discussion by posting your problems, solutions and experiences with Star Citizen crashes in the comment section.

Top 10 Fixes for Ryse: Son of Rome Crash, Freeze, Error, Can't Save, Change FPS, Steam API64 DLL, 0xc000, Unarc DLL, AppCrash, SLI, Crossfire

Basic troubleshooting guide for the PC video game “Ryse: Son of Rome” written by: serpa123 In this article you will learn how to fix the most common bugs and errors in the freshly released PC port of an Xbox One exclusive action-adventure video game – Ryse: Son of Rome. But first and foremost, check your hardware and OS whether it is appropriate for this level of game.

Top 10 Fixes for Ryse: Son of Rome Crash, Freeze, Error, Can’t Save, Change FPS, Steam API64 DLL, 0xc000, Unarc DLL, AppCrash, SLI, Crossfire

Here’s the top 10 list of fixes for PC version of Ryse: Son of Rome:

1. Can’t save the game

The developers are aware of this huge bug and promise to fix things with the first upcoming patch for the game. But there is a solution to this problem laready and it lies in the Steam Cloud Sync service that saves your game progress on a Steam server, so just turn off the sync feature in your Steam account preferences and the game will automatically save files to your local hard drive.

2. The game freezes after the introductory video

This problem usually appears after the installation of the newest ATI drivers. Usually game developers advise gamers to update their graphics card drivers but in this case do the opposite and try to roll back the driver and minimize the graphics settings as much as you can. Naturally the game freezes if it doesn’t fit the system requirements and there’s nothing you can do about it unless you can buy a new batch of RAM for your PC.

3. Can’t start the game

First of all Ryse: Son of Rome doesn’t run on a 32-bit OS. If you have 64-bit OS and you still can’t start the game then do the following:

  • check if your Play button at Steam is activated, if not try to restart Steam app.
  • if it doesn’t help, first check the cache of the game, and then restart your Steam app.
  • if you still can’t get the game running – update or reinstall Steam.

4. Can’t change the FPS limit

Many recent games, especially for consoles, set an unbreakable limit for the number of frames per second. Usually it’s 30 frames per second. You can remove this restriction by enabling a Vertical Sync feature in the graphics preferences and set the refresh rate through the control panel of your graphics card app.

5. Ryse: Son of Rome crash

If you own a Nvidia graphics card you can fix this problem by disabling ShadowPlay in your graphics card’s preferences.

6. steam_api64.dll error

Your file is either blocked or deleted by your antivirus. So, just disable it during the re-installation of the game.

7. 0xc0000142, 0xc000007b and 0xc00007b errors

  • disable your antivirus software
  • clean your registry with CCleaner
  • reinstall the game and all the additional software: Direct X, MS Visual C ++ redistributable and Net Framework

8. unarc.dll error

If you receive this error it means that:

  • your installation files have been downloaded only partially – download your files again
    there is not enough space on your local hard drive
    turn off your antivirus at the time of installation

9. AppCrash error

Run the game as administrator by right-clicking on the icon of the game.

10. Can’t run the game on SLI or Crossfire

The game officially supports the NVIDIA SLI modes and AMD Crossfire. Try to update your graphics card drivers.

If you’re having other kinds of problems with this game, please, post them in the comments section and we’ll try to find the solutions as soon as possible. And don’t forget that Ryse: Son of Rome is a port of a console game, so there’s always going to be problems.

Top 10 Fixes for Styx Master of Shadows Crashes, Launch Error, Safe Mode, Resolution Fix, Subtitles, Unlock Predator, Spinning, Quick Save

As with any new PC game, Styx Master of Shadows has come with some problems that basic troubleshooting should be able to take care of. One of the new popular stealth video games, it’s a prequel to the 2012 Of Orcs and Men developed by Cyanide Studios. Before trying any of these troubleshooting tips, make sure that your hardware has the appropriate system requirements and check for any viruses. Even the weakest viruses may prevent the game from working properly.

Top 10 Fixes for Styx Master of Shadows Crashes, Launch Error, Safe Mode, Resolution Fix, Subtitles, Unlock Predator, Spinning, Quick Save

1) Click Play, Nothing Happen.

2) How to launch in safe mode?

To launch in safe mode, you have to edit the file StyxGame.ini which is located at ‘DocumentsMy GamesStyxStyxGameConfig’
Then find the line bLaunchSafeMode=false and modify the line to bLaunchSafeMode=true.

Save the file and launch the game from Steam.

2) How to use an unrecognized resolution?

You have several options in the file StyxGame.ini which is located at ‘DocumentsMy GamesStyxStyxGameConfig’, here is the detail:

  1. ResolutionClamp – If the value is false, it allows to use a resolution higher than the main screen size.
  2. UseOverridedResolution – If the value is true, it allows to force the resolution and the fullscreen with the following options: OverridedResolutionX and OverridedResolutionY. There is also the option to: OverridedResolutionFullscreen: If the value is true, it forces the fullscreen mode.

4) Why is there low performance on graphics when my computer has two graphics controllers?

The game may not run using the correct (dedicated) graphics adapter automatically. For this, there are two scenarios:

  1. Your graphic controller dedicated for video game is a NVIDIA GEFORCE.
  2. Your graphic controller dedicated for video game is an AMD RADEON HD

5) How to change the subtitles:

To switch the subtitles, go to your Steam library and right-click on the game then ‘Properties’.
You will have a language tab to switch the subtitles.

6) Why can I not activate my product code?

If you bought this Steam code online, it is likely the merchant is unlicensed and not part of the official distribution network.
In this case, ask for a refund on your purchase and buy the game from one of the official channels, such as the Steam store itself.

7) I can’t play with gamepad and when I play it the game just spins round and round

You may have been pushing the control stick to the left or right while plugging it in. Try placing the controller face up on your desk, unplug the controller, then plug it back in.

8) How do you unlock the last part of the skill tree ?

The Predator skill tree is basically NG+1: You can unlock one talent every 2 full unlocked trees.

9) Checkpoint only saving or can you manually save?

Full save system in this game: Manual save and load via menu, quick save and -load via F5 and F9.

10) Game length?

Overall there should be 8 missions, it could well take you 20 hours to complete the game, and more if you replay missions or try to go for all collectibles in you first runs of each level.

How to Get Free 1,000 VC in NBA 2K15 Using Locker Code

Here’s a quick guide to get 1,000 VC using your first locker code in NBA 2K15.

Go to “Options/Features.” Scroll all the way to the right until you see “Locker Codes.” Type in “IWATCHEDNBA2KTV.” You will receive your first 1,000 VC to use on NBA2K15.

This code was obtained by watching the first episode of NBA 2KTV. Highly recommend watching the following episodes as some nice goodies may be there.

maxresdefault (1)

Top 10 Fixes for NBA 2K15 Crash, D3D11 Error, Freezing, Change graphics, Connect online, Poor FPS, Facial scanning, Stuttering

Alright gamers, are you all ready to experience the best of gaming? Who isn’t? This is the final part of the year, meaning the fun is about to begin. Various games are in the line of release, and our favorite sports genre is definitely not lacking behind. It’s about time, we all get our yearly dose of sports gaming, especially the NBA fans. NBA 2k15, combined with all the new gen technology, features and game modes, is nothing but a treat for basketball lovers.

However, PC version of this game is nothing but a headache for many fans. Errors/Crashes/Bugs are killing the mood. And the fact you’re here means you know what I’m talking about and are eager to find solutions as fast as possible. Here is the list of some relevant solution for your problem.

Top 10 Fixes for NBA 2K15 Crash, D3D11 Error, Freezing, Change graphics, Connect online, Poor FPS, Facial scanning, Stuttering

#1 NBA 2K15 Crashes after Splash Screen

If you are experiencing this problem, you can take following steps to make it run.

Disable your internet connection. This will stop the game to connect to 2k servers by itself. This method worked for some users as they have reported it as working solution to the problem.

But if it still persist, try disabling the Steam overlay option’ & reboot your system. Updating drivers can also resolve the issue.

#2 Direct3D11 Error

Just try reinstalling DirectX and update your GPU drivers. Some users reported that it worked for them.

#3 NBA 2K15  Game Freezes Randomly

Stuck at the loading screen, or during the match? Well try going offline. It seems that the problem is on 2k’s end, their crappy servers are the cause of this problem. So until they find a solution, offline mode is all you got. Don’t give up though, if you can find a solution, then don’t forget to share in comments!

#4 Can’t Change Graphics Settings in NBA 2K15

Some users have complained about graphics settings, that the game doesn’t allow them to change it through in-game menu. To overcome this issue, try to change it from your GPU control panel. If you are a Nvidia user, go to the GPU control panel > 3-D settings, and add NBA2K in the list of program and tweak it as you wish.

If anyone here has this issue for AMD GPUs, try to figure the solution and post it here for others.

#5 Unable to Connect to NBA 2K15 Online Servers

Try waiting for some time and log again. This is again the issue of their great servers.

#6 Performance Issue

Try looking at the system requirement first, and if your PC doesn’t come in high end category, lowering graphics setting is your best solution. Otherwise, forcing Vsync via GPU control panel is something you can try. Make sure, that you don’t run any unnecessary background app.

#7 Game Crashes to Desktop

So much effort to bypass the issue of game not starting just to end up facing this. It’s definitely a bummer, if anything, right? Just disable you internet and make sure you set the game’s refresh rate to match your screen refresh rate. Trying #6 in this case might also work.

#8 My Player is a Monster!

This one is the most funny (scary) glitch ever. 2k introduced their next gen tech. called facial scanning. Never in their wildest dream could they have imagined that this is how it will turn out. To work around this glitch you can download a guide. Read this to know more.

#9 Stuck in the Loop

If you are experiencing a loop, in Heat vs Spurs, with only music and no commentary; try updating to the latest patch. It worked for many users. Also make sure that your game is complete, if you have downloaded it from steam. Even if download status shows 47/47, it’s still incomplete. Wait for it to show COMPLETED, and you’re good to go.

#10 Heavy Stuttering in NBA 2K15

If you’re experiencing temporary stutter during game-play in which a player magically disappears from one court and appears on another, try updating your drivers. That’s the first thing you should do. Some users reported that it worked for them. See whether it solves your problem or not.

If you have followed every step here, and your problem still persists don’t forget to comment here. We’ll see to it as soon as possible. In addition to this it’s always necessary for you to keep your drivers updated, as it always solves half the problem.